MICRO SWITCH™ Basic Switches
Premium and Standard V-Series Switches

Simple or precision on/off, end of limit, presence/absence, pressure, temperature, and manual operator interface application needs. Potential uses include a variety of applications, including business equipment, valves, manually operated devices, vending machines, water heaters, appliances, and industrial controls.

Premium and Standard V-Basic Switches

v7v15 v15w
SeriesV7V15V15W Watertight
Amp rating0.1 A to 25 A5 A to 260.1 A, 5 A, 10 A
CircuitrySPDT, SPNO, SPNCSPDT, SPNO, SPNCSPDT, SPNC, SPNO
Operating force0.7 oz max. to 14.6 oz max.US: ≥100 g (16 A to 26 A);
AP: 15 g to 400 g (5 A to 26 A)
15 g, 25 g, 50 g, 100 g, 200 g
Terminationsquick connect, pc board, pcb straight angle leftquick connect; direct wire connection with
no terminals, RAST
preleaded; terminals: 4,8 mm x 0.8 mm or
4,8 mm x 0.5 mm
Actuators/Leverspin plunger, straight, short flag, roller, sim. roller, curved tip, loop, paddlepin plunger, straight, roller, sim. rollerpin plunger, straight, roller, sim. roller, special
Voltage125 Vac, 250 Vac, 277 Vac125 Vac, 250 Vac125 Vac, 250 Vac, 30 Vdc, 48 Vdc
ApprovalsUL, CSA, ENEC125 Vac, 250 VacUL, cUL, ENEC, CQC
Operating temperature-40 °C to 82 °C
[-40 °F to 180 °F]
-25 °C to 150 °C
[-13 °F to 300 °F]
-40 °C to 85 °C
[-40 °F to 185 °F]
Contactssilver, silver cadmium oxide, goldsilver cadmium oxidesilver nickel, gold-plated option
Housing materialPCT polyester thermoplasticPBT polyester thermoplasticPBT polyester thermoplastic
Measurements15,9 mm H x 10,2 mm W x 28,8 mm L
[0.63 in H x 0.4 in W x
1.14 in L]
15,9 mm H x 10,3 mm W x
27,8 mm L
[0.63 in H x 0.41 in W x 1.09 in L]
15,9 mm H x 10,3 mm W x 33 mm L
[0.63 in H x 0.41 in W x
1.3 in L]
Featuresextended mechanical and electrical
life; custom engineered
solutions
broad range of electrical
loads; wide temperature range;
limited configuration options
available
designed for harsh-duty, wash
down areas; high sealing capability
with an IP67 rating (pre-leaded
only)

Further information in the catalogue “Basic, Toggle, & Rocker Switches” from Honeywell.

MICRO SWITCH™ Basic Switches
Premium/Standard Miniature & Subminiature Switches

Designed for high precision, presence and absence detection, where physical contact with an object is permissible and in simple on-and-off actions. These compact, highly reliable and rugged switches are used in potential applications including aerospace, HVAC, instrumentation, office equipment, medical/dental, valves, and vending machines.

sm sx zd
SeriesSMSXZD
Typepremiumpremiumstandard
Amp rating0.1 A to 11 A1 A to 7 A0.1 A, 3 A
CircuitrySPDTSPDT, SPNOSPDT
Operating force0.04 oz to 2 oz0.71 oz to 6 oz130 gf to 195 gf
Terminationsquick connect, solder, pcbquick connect, solder, pcbsolder, pcb straight, pcb left angle,
pcb right angle, pre-wired
Actuators/leverspin plunger, straight, roller, sim. roller, paddlepin plunger, straight, roller, sim. roller, offset flag,
crossed roller
pin plunger, straight,
sim. roll
Voltage115 Vac, 125 Vac, 250 Vac, 30 Vdc125 Vac, 250 Vac, 28 Vdc125 Vac, 12 Vdc
ApprovalsUL, CSA, ENEC, CEUL, CSA, ENEC, CEUL, cUL, CE, ENEC
Operating temperature range -55 °C to 125 °C
[-67 °F to 267 °F]
-55 °C to 125 °C
-67 °F to 267 °F]
-40 °C to 85 °C
[-40 °F to 185 °F]
Contactssilver, goldsilver, goldsilver, gold-plated silver
Housing materialphenolicphenolic or Valox®PBT polyester
Measurements12,7 mm H x 6,35 mm W x 20,3 mm L
[0.5 in H x 0.25 in W x 0.8 in L]
12,7 mm H x 6,35 mm W x 20,3 mm L
[0.5 in H x 0.25 in W x 0.8 in L]
10,6 mm H x 6,35 mm W x
19,8 mm L [0.42 in H x 0.25 in W
x 0.78 in L]
Featuresextended operating life; elongated mounting holes;
MIL-PRF-8805 qualified listings available
extended operating life; elongated mounting holes;
MIL-PRF-8805 qualified listings available
low energy or power-duty electrical
ratings; gold-plated or silver
contacts; PBT polyester housing
material

 

zm zv zv zx
SerieZMZVZWZX
Typestandardstandardstandardstandard
Amp rating0.1 A, 5 A, 10.1 A, 16 A0.1 A, 6 A, 10.1 A0.1 A, 5 A0.1 A, 3 A
CircuitrySPST, SPDT, SPNOSPDT, SPNO, SPNCSPDT, SPNO, SPNCSPDT
Operating force0.18 oz to 8.78 oz0.78 oz to 11.01 oz1.94 oz to 7.16 oz0.53 oz to 5.3 oz
Terminationsquick connect, solder, pcbquick connect, solder, pcbquick connect, solder,
cable bottom/end, cable side exit
solder, pcb snap-in, pcb left angle,
pcb right angle
Actuators/leverspin plunger, straight, roller,
sim. roller, L-shaped
pin plunger, straight, roller,
sim. roller
pin plunger, straight, roller,
sim. roller
pin plunger, straight,
sim. roller, special
Voltage125 Vac, 250 Vac, 30 Vdc125 Vac/125 Vdc; 6 (2) A, 250 Vac125 Vac, 250 Vac125 Vac, 48 Vdc
ApprovalsUL, CSA, CEUL, cUL, ENEC, CEUL, cUL, CE, ENECUL, CSA
Operating temperature range-25 °C to 85 °C
[-13 °F to 185 °F]
-25 °C to 85 °C
[-13 °F to 185 °F]
-25 °C to 80 °C
[-13 °F to 176 °F]
-25 °C to 85 °C
[-13 °F to 185 °F]
Contactssilver, gold-plated silver,
silver-tin-indium oxide
silver, gold-plated silver,
silver-tin-indium oxide
silver, gold-plated silversilver, gold-plated silver
Housing materialpolyamide (nylon)polyamide (nylon)PBT (polyester)polyamide (nylon)
Measurements10,6 mm H x 6,4 mm W x
19,8 mm L [0.42 in H x 0.25 in W
x 0.78 in L]
10,6 mm H x 6,4 mm W x
19,8 mm L [0.42 in H x 0.25 in W
x 0.78 in L]
9,0 mm H x 6,4 mm W x
19,8 mm L [0.36 in H x 0.25 in W
x 0.78 in L]
6,5 mm H x 5,7 mm W x
12,7 mm L [0.26 in H x 0.22 in W
x 0.50 in L]
Featureslow energy or power-duty electrical
ratings; gold-plated or silver
contacts
low energy or power-duty electrical
ratings; gold-plated or silver
contacts
IP67 available; low energy or
power-duty electrical ratings;
gold-plated or silver contacts; PBT
polyester housing material
low energy or power-duty electrical
ratings; gold-plated or silver
contacts; polybutylene terephthalate
housing
     

Further information in the catalogue “Basic, Toggle, & Rocker Switches” from Honeywell.

MICRO SWITCH™ Basic Series
Large Switches and Accessories

Often ideal for high cost-of-failure applications. Low operating force and differential travel. Current ratings from 10 A to 25 A. Designed to withstand 100K operations at full load or 10M for mechanical life. Have been used in a variety of applications including irrigation, transportation, medical/dental, valves, office equipment, presses, machine tools, and HVAC.

bz dt mt ac
SeriesBZ/BA/BM/BE DTMTAC
Typepremiumpremiumpremiumspecial application
Amp rating15 A (BZ), 22 A (BM), 20 A (BA), 25 A (BE)10 A10 A5 A to 25 A
CircuitrySPDTDPDTSPDTSPDT
Operating force1.0 oz to 28 oz7.0 oz to 10.0 oz2.0 oz to 18 oz
Terminationsquick connect, solder, screwscrewscrewturret-type solder, screw, flying leads
Actuators/leverspin plunger, overtravel plunger, straight, roller,
flexible roller leaf, flexible leaf
pin plungerpin plunger, straight, rollerrod
Voltage115 Vac, 125 Vac, 250 Vac250 Vac, 28 Vdc125 Vac, 125 Vdc125 Vac, 250 Vac, 480 Vac, 30 Vdc
ApprovalsUL, CSA, ENEC, CE (varies by model)UL, CSAUL, CSAUL, CSA
Operating temp. range-55 °C to 85 °C [-67 °F to 185 °F]-55 °C to 85 °C [-67 °F to 185 °F]-55 °C to 82 °C [-67 °F to 180 °F]-54 °C to 121 °C [-65 °F to 250 °F]
Contactssilver, silver cadmium oxidesilversilversilver
Housing materialgeneral purpose phenolicgeneral purpose phenolicarc resistant melaminedie-cast stainless steel bracket,
stainless steel or polyester rod
Measurements25,4 mm H x 17,8 mm W x 50,8 mm L
[1.0 in H x 0.7 in W x 2.0 in L]
25,4 mm H x 17,8 mm W x 50,8 mm L
[1.0 in H x 0.7 in W x 2.0 in L]
25,4 mm H x 17,8 mm W x 50,8 mm L
[1.0 in H x 0.7 in W x 2.0 in L]
varies by model
Featuresworldwide standard “large basic” switch; low operating
force and travel; extended mechanical life; momentary or
maintained actions
mounting interchangeability with BZ Series switches;
permits several wiring combinations
mounting interchangeability with
BZ/BA Series switches; arcextinguishing design in contact area; arc-resistant case
cuts power when door/drawer is
opened; momentary, maintained or pull-to-cheat actuation; one or two SPDT switches

Further information in the catalogue “Basic, Toggle, & Rocker Switches” from Honeywell.

MICRO SWITCH™ Basic Switches
Sealed Switches

Sealed switches are snap-action precision switches enclosed within a corrosion-resistant aluminum housing that seals the switch contacts from contamination. These sealed switches have often been used in aerospace, ordnance, industrial, marine, and transportation applications.

se hm hs 1ht13ht12ht1
SeriesSE/XEHMHSHT Series (1HT1, 3HT1, 2HT1)
Typeanodized aluminumstainless steelstainless steel, phenolicGENERAL INFORMATION
HT switches will withstand temperatures
up to +1000°F. The switching element is
mounted on a ceramic base within a
stainless steel enclosure.HTswitches are
not classified as sealed switches.
SealingMIL-PRF-8805, symbol 3, watertightMIL-PRF-8805, symbol 5, hermeticMIL-PRF-8805, symbol 5, hermeticNo
Operationg temperature-53 °C to 105 °C [-65 °F to 221 °F]-65 °C to 121 °C [-85 °F to 250 °F]
high temp available: 500 °F

-54 °C to 121 °C

[-65 °F to 250 °F]

tolerance up to +1000°F
(538°C)
Actuators/ leversauxiliary actuators availableintegral lever; aux. actuators: leaf, roller leaf, straight, roller leverintegral lever
Terminationsolder, leadwiresolder, leadwirescrew, leadwirescrew
CircuitrySPDTSPDTSPDTSPDT (Single Pole, Double Throw)
Contactssilver, gold, bifurcated goldsilver, gold, bifurcated goldsilverDesigned to meet military applications
Amp rating0.5 A to 7 A0.5 A to 3 A1 A to 25 AUL Ratings:
3 amps, 1/10 HP, 125 vac.
3 amps, 1/6 HP, 250 vac.
ApprovalsCE, UL/CSA,
MIL-PRF-8805 (selected listings)
MIL-PRF-8805 (select listings qualified)UL, CSA, MIL-PRF-8805UL recognized file # E12252, CSA
MeasurementsSE: 19,05 mm H x 8,64 mm W x 22,35 mm L
[0.75 in H x 0.34 in W x 0.88 in L]
XE: 19,05 mm H x 8,13 mm W x 15,75 mm L
[0.75 in H x 0.32 in W x 0.62 in L]
12,7 mm H x 6,35 mm W x 20,3 mm L
[0.5 in H x 0.25 in W x 0.8 in L]
25,4 mm H x 17,8 mm W x 50,8 mm L [1.0 in H x 0.7 in W x 2.0 in L]more information: Please ask us.
Featureswatertight and military standard construction per MIL-PRF-8805; corrosion-resistant aluminum housinghermetically sealed per MIL-PRF-8805; high temperature construction; reduced sensitivity to changes in altitude or pressurehermetically sealed per MIL-PRF-8805; high temperature construction; reduced sensitivity to changes in altitude or pressure

Further information in the catalogue “Basic, Toggle, & Rocker Switches” from Honeywell.

MICRO SWITCH™ Basic Switches
Sealed and Standard Toggles and Rockers

Hermetic and environmentally sealed toggle switches offer enhanced reliability with MICRO SWITCH™ technology. Can be used in a variety of applications where a panel-mount switch with an environment-proof rating is needed, including industrial equipment, military and commercial aviation, agriculture, process control, and medical.

tw et nt tl
SeriesTWETNTTL
Typeminiature stainless steel togglemagnetically held toggleindustrial-grade togglemilitary-grade toggle
Sealingqualified to MIL-DTL-83781most listings qualified to MIL-S-5594IP67/68; NEMA 3, 3R, 4 and 13qualified to MIL-DTL-3950
Operationg temp.-65 °C to 71 °C [-85 °F to 160 °F]-65 °C to 71 °C [-85 °F to 160 °F]-40 °C to 71 °C [-40 °F to 160 °F]-65 °C to 71 °C [-85 °F to 160 °F]
Actuator/leverstandard, locking, special design, tabstandard, pull/push-to-unlock, tabstandard, locking, special design, tabstandard, special design, tab, paddle, none
Action2- or 3-position, momentary & maintained2- or 3-position, momentary & maintained2- or 3-position, momentary & maintained2- or 3-position, momentary & maintained
Mountingbushing 15/32 in or 1/4 inbushing 15/32 inbushing 15/32 inbushing 15/32 in
TerminationIWTS, solder, screw, quick connect, H58, T2screw, leadwire, turretsolder, screw, quick connectIWTS, solder, screw, quick connect, leadwire
CircuitrySPST, SPDT, DPST, DPDTSPDT, DPDT, 4PDTSPST, SPDT, DPST, DPDT, 4PST, 4PDTSPST, SPDT, DPST, DPDT
3PST, 3PDT, 4PST, 4PDT
Contactssilver alloy, gold-platedsilver alloy, gold-platedsilver alloysilver alloy, gold-plated
Amp rating0.1 A to 5.0 A @ 0.5 Vdc to 28 Vdc;
0.1 A to 5.0 A @ 0.5 Vac to 115 Vac
7 A max. (resistive)up to 20 A (resistive)up to 20 A (resistive)
Measurements49,78 mm H x 14,61 mm W x
14,61 mm D
[1.96 in H x 0.575 in W x 0.575 in D]
51,56 mm H x 25,4 mm W x
25,4 mm D
[2.03 in H x 1.0 in W x 1.0 in D]
26,7 mm H x 33,5 mm W x
22,6 mm D
[1.05 in H x 1.32 in W x 0.89 in D]
26,7 mm H x 33,5 mm W x 22,6 mm D
[1.05 in H x 1.32 in W x 0.89 in D]
ApprovalsUL, qualified to MIL-DTL-83781qualified to MIL-S-5594UL, CSA, CEUL, CSA, CE, qualified to MIL-DTL-3950
Featuressaves space and weight; sealed bushing
versions
holding coil replaces mechanical holding
mechanisms to maintain toggle in operate
completely sealed switching chamber;
enhanced tactile feedback
environment-proof sealing; qualified to
MIL-DTL-3950

We are looking forward to a good cooperation with you!


→ go back to product overview