TruStability – Series:

Honeywell`s TruStability Board Mount Pressure Sensors consist of the following Series:

HSC-Serie
Compensated, amplified, ultra-low and low pressure

SSC –Serie
Compensated, amplified, ultra-low and low pressure

NSC – Serie
Uncompensated, unamplified, ultra-low and low pressure

TSC – Serie
Compensated, unamplified, low pressure

Piezoresistive silicon pressure sensors offering ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. Measure pressure ranges from

+-1.6 mbar to 10mbar, +- 160Pa to +-1MPa,
and +-0.5 inH2O to 150psi.

Multiple packaging, mounting, signal and customized calibration capabilities. With the single side wet media option, you can use one port of the sensor with condensing humidity or directly with non-corrosive liquid media.

SeriesTruStability RSC Serie   NEW !!!TruStability HSC SerieTrustability SSC-SerieTrueStability TSC-SerieTruStability NSC-Serie
Descriptionamplifiedamplifiedamplifiedunamplifiedunamplified
Pressure Range+/- 1,6mbar to 10bar
[+/- 0,5in H2O to +/- 150psi]
+/- 60mbar to +/- 10bar
[+/- 1psi to +/- 150psi];
+/- 1,6mbar to +/- 40mbar
[+/- 0,5in H2O to +/- 30inH2O]
+/- 60mbar to +/- 10bar
[+/- 1psi to +/- 150psi];
+/- 1,6mbar to +/- 40mbar
[+/- 0,5in H2O to +/- 30inH2O]
+/- 60mbar to +/- 10bar
[+/- 1psi to +/- 150psi];
E4
+/- 60mbar to +/- 10bar
[+/-1psi to +/- 150psi];
+/- 2,5mbar to +/- 40mbar
[+/-1,0 in H2O to +/- 30inH2O]
Device Typegage, differential, absolutegage, differential, absolutegage, differential, absolutegage, differentialgage, differential, absolute
Output Signal24 bit digital SPI-compatibleanalog (Vdc); digital (I2C or SPI)analog (Vdc); digital (I2C or SPI)analog (mV)analog (mV)
Calibratedyesyesyesyesno
Temperature comp.yesyesyesyesno
Total error band+/-0,75%FSS;  +/- 1%FSS; +/- 2% FSS; +/- 3% FSS+/- 1% FSS+/- 2% FSS  
Accuracy+/- 0,1 % FSS BFSL+/- 0,25% FSS BFSL+/- 0,25% FSS BFSL+/- 0,25% FSS BFSL+/- 0,25% FSS BFSL
Mounting optionsDIP, SMTDIP, SIP, SMTDIP, SIP, SMTDIP, SIP, SMTDIP, SIP, SMT
Operating temperature range-40°C to +85°C
[-40°F to 185°F]
-20°C to +85°C
[-4°F to 185°F]
-40°C to +85°C
[-40°F to 185°F]
-40°C to +85°C
[-40°F to 185°F]

-40°C to +85°C
[-40°F to 185°F]

Compensated temperature rangecompensated
0 °C to 50 °C
[32 °F to 122 °F]
compensated
0 °C to 50 °C
[32 °F to 122 °F]
compensated
 -20 °C to +85°C
 [-4 °F to 185 °F]
compensated
0 °C to 85 °C
[32 °F to 185 °F]
uncompensated
Maesurements ( H x W x D )(10 x 12,5 )mm; [0,39 x 0,49]invaries by package stylevaries by package stylevaries by package stylevaries by package style
ApprovalsRoHS, REACHRoHS, WEEERoHS, WEEERoHS, WEEERoHS, WEEE
FeaturesThe RSC Series is a piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-linearity using a 24-bit analog-todigital converter with integrated EEPROM. Pressure data may be acquired at rates between 20 and 2000 samples per second over an SPI interface. It is intended for use with non-corrosive, non-ionic gases, such as air and other dry gases, designed and manufactured according to ISO 9001 standards, and is REACH and RoHS compliant.Power consumption less than 10mW, typ; industry-leading long-term stability; liquid media option extends performance to non-corrosive, non-ionic liquidsindustry-leading long-term stability; liquid media option extends performance to non-corrosive, non-ionic liquidscompensation makes it easier to integrate the sensor into systemas it eliminates the need to calibrate the system over temperatur; reduced part-to-part variationprovides the flexility for customers to perform their own calibration while still benefitting from industry-leading stability, accuracy, and readability

Basic – Series:

In addition to its TruStability pressure sensors, Honeywell offers many other board mount pressure sensing devices including 24PC, 26PC, ASDX, NBP and TBP Series.

Proven sensing technology that uses a specialized piezoresistive micromachined sensing element.

Pressure ranges from 5 in H2O to 250 psi.

Series 26PC 24PC40PC
Descriptioncalibratedbare sensoramplified
Construction silicon die
 elastomeric
 technology
 silicon die
 elastomeric
 technology
monolithic silicon die
Pressure Range 1 psi to 100 psi 1 psi to 100 psi+/- 1 psi to 500 psi
Device Typedifferential, gageabsolute, differential, gagegage
Output SignalmVmV0.5 Vdc to 4.5 Vdc
Accuracy linearity, hysteresis & repeatability
 0.5 % typ.
 linearity, hysteresis & repeatability
 0.5 % typ.
linearity &
 hysteresis
 0.25 % typ.
Temperature Rangecompensated
 0 °C to 50 °C
 [32 °F to  122°F]
no temperature compensationcompensated
 -45 °C to 125 °C
 [-49 °F to  257°F]

 

SeriesSXSCX
Description

bare sensor

calibrated
Constructionsilicon die on
 ceramic voltage excitation
silicon die with thick-film
 resistors
Pressure Range1 psi to 300 psi1 psi to 150 psi
Device Typeabsolute, gageabsolute,differential,
 gage
Output SignalmVmV
Accuracylinearity, hysteresis
 & repeatability
 0.2 % typ.
linearity &
 hysteresis
 0.3 % typ.
Temperature Rangeno temperature
 compensation
compensated
 0 °C to 70 °C
 [32 °F to 158 °F]

Potential Applications

Air compressors, airflow monitors, automotive, diagnostics, barometers, battery-powered equipment, blood analysis machines, chemical analyzers, dental equipment, dialysis equipment, environmental controls, flow calibrators, gas chromatography, gas flow instrumentation, HVAC, industrial instrumentation and machinery, medical monitors, oxygen concentrators, pneumatic controls, sleep apnea monitoring, therapy equipment, and ventilation.

Heavy-Duty – Pressure Sensors

Developed for potential use in pressure applications involving  measurement of hostile media in harsh environments compatible  with 316 stainless steel. This type of steel increases corrosion resistance, improves resistance to pitting from chloride ion solutions, and provides increased strength at high temperatures.

The small sensor size allows them to be used on their own in tight packages or as the building block for a complete transducer. The vacuum gage series sensors are specifically designed for potential use in applications that can be exposed to vacuum.

Series include 13 mm and 19 mm.

Series19U19C
Descriptionnon-calibrated
 bare sensor
 media isolated
calibrated
 media isolated
Constructionwetted parts
 316 L SS
wetted parts
 316 L SS
Pressure Range3 psi to 500 psi3 psi to 500 psi
Device Typeabsolute, gage
 vacuum gage
absolute, gage
 vacuum gage
Output Signal100 mV100 mV
Accuracylinearity &
 hysteresis
 +/- 0.2 % max
linearity &
 hysteresis
 +/- 0.2 % max
Temperature Rangeno temperature
 compensation
compensated
 -25 °C to 85 °C
 [-13 °F to  185°F]

Pressure Transducers – Heavy-Duty

Complete amplified and compensated pressure measurement solutions. With a choice of ports, connectors, outputs, and pressure ranges, these transducers can be configured to meet the needs of the application. Heavy-duty pressure transducers are engineered to be resistant to aggressive media in most harsh environments.

Series include MLH, PX2, PX3 and SPT.

SeriesPX2PX3SPTMLH   (Re-design in preparation! Please ask us if you need actually information about this serie!)
DescriptionNPT 1/4-18, NPT 1/8-27, 9/16-18 UNF SAE J1926-3, 7/16-
20 UNF SAE J1926-3, 1/4 45° Flare Female Schrader, M12 X
1.5 ISO 6149-3, G1/4 ISO 1179-3, G1/8 ISO 1179-3
7/16-20 UNF; G1/4; M12 x 1,5; 1/4-18 NPT; 1/8-27 NPT1/8-27 NPT, 1/4-18 NPT, 7/16-20 UNF,
1/4-19 BSPP, 1/4 VCR gland
1/4-18 NPT; M12 x 1.5 (ISO 6149); M14 x 1.5 (ISO 6149); 3/8-24 UNF
(SAE-3 O-ring boss); M18 x 1.5 (ISO 6149); 1/8 in-27 NPT; 1/2 in-20 UNF
(SAE-5 O-ring boss); M10 x 1 (ISO 6149); 1/4 in SAE female Schrader anmd many more …
Constructionport and housing: 304 stainless steel;
connector: PBT 30% GF
port brass C36000; Metri Pack 150: PBT 30%GF; external O-ring seal on G1, M1 port: nitrilewetted parts 316L SSport: 304L stainless steel; diaphragm: Haynes 214 alloy
Pressure Rangeabsolute, sealed gageabsolute, sealed gageabsolute, sealed gage5 psig to 250 psigabsolute, sealed gage, 50 psig to 8k psig
Output Signalratiometric: 5.0 V, 10 %Vs to 90 %Vs; 5.0 V, 5 %Vs to 95
%Vs; 3.3 V, 10 %Vs to 90 %Vs; 3.3 V, 5 %Vs to 95 %Vs
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to
4.5 Vdc, 1 Vdc to 5 Vdc
current: 4 mA to 20 mA
ratiometric (from 5 Vdc excitation): 0.5 Vdc to 4.5 Vdc;4 mA to 20 mA, 0 mV to 100 mV,ratiometric (from 5 Vdc excitation): 0.5 Vdc to 4.5 Vdc;
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc,
1 Vdc to 5 Vdc;
current: 4 mA to 20 mA
Accuracy±0.25 % FSS±0.25 % FSS±0.25 %BFSL max.±0.25 %FSS (±0.5 %FSS on ranges below 100 psi)
Total Error Band±2 %FSS at -40 °C to 125 °C [-40 °F to 257 °F]±1 %FSS at -20 °C to 85°C [-4°F to 185°F] ±2 %FSS to ±15 %FSS, depending on temp range and termination type
Operating
Temperature Range
-40 °C to 125 °C [-40 °F to 257 °F]-40 °C to 125 °C [-40 °F to 257 °F]-40 °C to 85 °C [-4 °F to 185 °F]-40 °C to 125 °C [-40 °F to 257 °F]
Compensated Temperature range-40 °C to 125 °C [-40 °F to 257 °F]-40 °C to 125 °C [-40 °F to 257 °F]-10°C to 85°C [14°F to 185°F]ratiometric output: -40 °C to 125 °C [-40 °F to 257 °F]
Amplifiedyesyesyesyes amplified and unamplified
Termination/
Connector
Packard Metripak 150, Micro M12 IEC 61076-2,
DIN EN 175301-803C, Deutsch DTM04-3P,
cable harness (1, 2, 3, 5 meter)
Packard Metripak 150bayonet connector, cableDelphi Metripak 150; Hirschmann (mates with G4W1F); M12 x 1 (Brad
Harrison micro); DIN 43650-C, 8 mm-male; Amp Superseal 1.5; cable
(1 m); cable (3 m); flying leads (20 AWG – 6 in); Deutsch DTM04-3P
(integral)
Measurements66 mm x 21,5 mm dia. [2.60 in x 0.84 in dia.]ca. 50mm x 23 mm dia. 22,2mm x 22,2mm x length varies27mm x 27mm x 55mm
Certifications / ApprovalsRoHS; CERoHS, CE and REACHn.a.RoHS; CE; UL component recognition for USA/Canada: file no. E258956
Featuresdesigned for configurability; cost-effective; application
expertise; global support; industry-leading Total Error Band;
durable; designed to Six Sigma standards; broad compensated
temperature range; good EMC protection
Low current bconsumption; Media compatibility, wide pressure range ( 1bar to 46 bar); Ingress protection up to IP67calibrated and temperature compensated;
NEMA 4 design; rugged 316 stainless steel
wetted parts
all-metal wetted parts; no internal elastomeric seals; stable and creepfree;
input reverse voltage protection; less than 2 ms response time; easy
customization; exceeds CE heavy industrial EMC for use in areas of high
RFI/EMI

We are looking forward to a good cooperation with you!


→ go back to product overview