TruStability – Serien
Piezoresistiver Siliziumdrucksensor mit ratiometrischem Analog- oder Digitalausgang zum Erfassen des Drucks über einen festgelegten Druckbereich sowie festgelegtem Temperaturbereich hinweg. Sensoren messen Drücke von
+/- 2,5mbar bis 40mbr [+/1 1inH2O bis +/- 30 in H2O]
+/- 60mbar bis 10bar [1 psi bis 150 psi ]
Verschiedene Gehäuse-, Montage-, Signal- und kundenspezifische Kalibrierungskonfigurationen sind möglich. Dank der Möglichkeit einer einseitigen Flüssigkeitsbeaufschlagung kann somit ein Anschlußport auch für „nasse“ (Kondensflüssigkeit) oder direkt für nichtkorrosive flüssige Medien verwendet werden. Produktserien sind:
HSC-Serie
verstärkt, kompensiert, kalibriert, sehr genau (1% Fehler )
SSC –Serie
verstärkt, kompensiert, kalibriert, genau (2% Fehler )
NSC – Serie
unverstärkt,
TSC – Serie
unverstärkt, kompensiert, kalibriert
| Serie | TruStability RSC Serie NEW !!! | TruStability HSC Serie | Trustability SSC-Serie | TrueStability TSC-Serie | TruStability NSC-Serie |
| Description | amplified | amplified | amplified | unamplified | unamplified |
| Pressure Range | +/- 1,6mbar to 10bar [+/- 0,5in H2O to +/- 150psi] |
+/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi]; +/- 1,6mbar to +/- 40mbar [+/- 0,5in H2O to +/- 30inH2O] |
+/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi]; +/- 1,6mbar to +/- 40mbar [+/- 0,5in H2O to +/- 30inH2O] |
+/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi]; E4 |
+/- 60mbar to +/- 10bar [+/-1psi to +/- 150psi]; +/- 2,5mbar to +/- 40mbar [+/-1,0 in H2O to +/- 30inH2O] |
| Device Type | gage, differential, absolute | gage, differential, absolute | gage, differential, absolute | gage, differential | gage, differential, absolute |
| Output Signal | 24 bit digital SPI-compatible | analog (Vdc); digital (I2C or SPI) | analog (Vdc); digital (I2C or SPI) | analog (mV) | analog (mV) |
| Calibrated | yes | yes | yes | yes | no |
| Temperature comp. | yes | yes | yes | yes | no |
| Total error band | +/-0,75%FSS; +/- 1%FSS; +/- 2% FSS; +/- 3% FSS | +/- 1% FSS | +/- 2% FSS | ||
| Accuracy | +/- 0,1 % FSS BFSL | +/- 0,25% FSS BFSL | +/- 0,25% FSS BFSL | +/- 0,25% FSS BFSL | +/- 0,25% FSS BFSL |
| Mounting options | DIP, SMT | DIP, SIP, SMT | DIP, SIP, SMT | DIP, SIP, SMT | DIP, SIP, SMT |
| Operating temperature range | -40°C to +85°C [-40°F to 185°F] |
-20°C to +85°C [-4°F to 185°F] |
-40°C to +85°C [-40°F to 185°F] |
-40°C to +85°C [-40°F to 185°F] |
-40°C to +85°C [-40°F to 185°F] |
| Compensated temperature range | compensated 0 °C to 50 °C [32 °F to 122 °F] |
compensated 0 °C to 50 °C [32 °F to 122 °F] |
compensated -20 °C to +85°C [-4 °F to 185 °F] |
compensated 0 °C to 85 °C [32 °F to 185 °F] |
uncompensated |
| Maesurements ( H x W x D ) | (10 x 12,5 )mm; [0,39 x 0,49]in | varies by package style | varies by package style | varies by package style | varies by package style |
| Approvals | RoHS, REACH | RoHS, WEEE | RoHS, WEEE | RoHS, WEEE | RoHS, WEEE |
| Features | The RSC Series is a piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-linearity using a 24-bit analog-todigital converter with integrated EEPROM. Pressure data may be acquired at rates between 20 and 2000 samples per second over an SPI interface. It is intended for use with non-corrosive, non-ionic gases, such as air and other dry gases, designed and manufactured according to ISO 9001 standards, and is REACH and RoHS compliant.Power consumption less than 10mW, typ; | industry-leading long-term stability; liquid media option extends performance to non-corrosive, non-ionic liquids | industry-leading long-term stability; liquid media option extends performance to non-corrosive, non-ionic liquids | compensation makes it easier to integrate the sensor into systemas it eliminates the need to calibrate the system over temperatur; reduced part-to-part variation | provides the flexility for customers to perform their own calibration while still benefitting from industry-leading stability, accuracy, and readability |
Basic – Serien
ABP – Serie
verstärkt, kompensiert, kalibriert, sehr genau ( 1%Fehler)
TBP – Serie
unverstärkt, kompensiert, kalibriert
NBP – Serie
unverstärkt,
| Serie | BASIC ABP Serie | BASIC TBP Serie | BASIC NBP |
| Description | amplified | unamplified | unamplified |
| Pressure Range | +/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi] | +/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi] | +/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi] |
| Device Type | gage, differential | gage | gage, absolute |
| Output Signal | analog (Vdc); digital (I2C or SPI) | analog (Vdc) | analog (Vdc) |
| Calibrated | yes | yes | no |
| Temperature comp. | yes | yes | no |
| Total error band | +/- 1,5% FSS | n.a. | n.a. |
| Accuracy | +/- 0,25% FSS BFSL | +/- 0,25% FSS BFSL | +/- 0,25% FSS BFSL |
| Mounting options | DIP, leadless SMT, SMT | DIP, leadless SMT, SMT | DIP, leadless SMT, SMT |
| Operating temperature range | -40°C to +85°C [-40°F to 185°F] |
-40°C to +125°C [-40°F to 257°F] |
-40°C to +125°C [-40°F to 257°F] |
| Compensated temperature range | 0 °C to +50°C [32°F to 122°F] |
compensated 0 °C to 85 °C [32 °F to 185 °F] |
|
| Maesurements ( H x W x D ) | as small as 8mm x 11mm x 8mm | as small as 7mm x 7mm x 3,84mm [ 0,276in x 0,276in x 0151in ] |
as small as 7mm x 7mm x 3,84mm [ 0,276in x 0,276in x 0151in ] |
| Approvals | RoHS, REACH | RoHS, WEEE | RoHS, WEEE |
| Features | The ABP Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. Special Option: Sleep Mode for battery powered devices ! | silicon gel coating in media part option for use in applications where condensation can occur | cost-effective; Honeywell brand; for use in applications where condensation can occur; small size, durable, flexible, robust |
ABP 2 – Serie
mit wahlweise analogem oder digitalem Ausgangssignal, kompensiert und kalibriert, Gesamtfehler 1,5%Fehler, verschiedene Ports, einige auch für Flüssigkeiten geeignet, Einsatz auch in der Lebensmitteltechnik (NSF).
24PC, 26PC und 40PC – Serie
Bewährte Sensortechnologie für die ein spezielles piezoresistives mikrobearbeitetes Sensorelement zum Einsatz kommt.
Druckbereiche von 12mbar bis 250 psi
| Serie | 26PC | 24PC | 40PC |
| Description | calibrated | bare sensor | amplified |
| Construction | silicon die elastomeric technology |
silicon die elastomeric technology |
monolithic silicon die |
| Pressure Range | 1 psi to 100 psi | 1 psi to 100 psi | +/- 1 psi to 500 psi |
| Device Type | differential, gage | absolute, differential, gage | gage |
| Output Signal | mV | mV | 0.5 Vdc to 4.5 Vdc |
| Accuracy | linearity, hysteresis & repeatability 0.5 % typ. |
linearity, hysteresis & repeatability 0.5 % typ. |
linearity & hysteresis 0.25 % typ. |
| Temperature Range | compensated 0 °C to 50 °C [32 °F to 122°F] |
no temperature compensation | compensated -45 °C to 125 °C [-49 °F to 257°F] |
| Serie | SX | SCX |
| Description | bare sensor | calibrated |
| Construction | silicon die on ceramic voltage excitation |
silicon die with thick-film resistors |
| Pressure Range | 1 psi to 300 psi | 1 psi to 150 psi |
| Device Type | absolute, gage | absolute,differential, gage |
| Output Signal | mV | mV |
| Accuracy | linearity, hysteresis & repeatability 0.2 % typ. |
linearity & hysteresis 0.3 % typ. |
| Temperature Range | no temperature compensation |
compensated 0 °C to 70 °C [32 °F to 158 °F] |
Hochleistung – Drucksensoren
Entwickelt für den potenziellen Einsatz in Druckanwendungen, bei denen in rauen Umgebungen aggressive Medien, die mit Edelstahl 316 verträglich sind, gemessen werden müssen. Diese Stahlart erhöht die Korrosionsbeständigkeit, verbessert den Widerstand gegen den von Chloridionen ausgelösten Lochfraß und bietet mehr Festigkeit bei hohen Temperaturen.
Dank der kleinen Baugröße können die Sensoren entweder separat – in engen Gehäusen- oder als Baustein eines vollständigen Druckwandlers verwendet werden.
Die Unterdruckmessgeräteserie ist speziell für den potenziellen Gebrauch in Anwendungen konzipiert, die einem Vakuum ausgesetzt sein können.
Erhältliche Serien: 13 mm und 19 mm.
| Serie | 19U | 19C |
| Description | non-calibrated bare sensor media isolated |
calibrated media isolated |
| Construction | wetted parts 316 L SS |
wetted parts 316 L SS |
| Pressure Range | 3 psi to 500 psi | 3 psi to 500 psi |
| Device Type | absolute, gage vacuum gage |
absolute, gage vacuum gage |
| Output Signal | 100 mV | 100 mV |
| Accuracy | linearity & hysteresis +/- 0.2 % max |
linearity & hysteresis +/- 0.2 % max |
| Temperature Range | no temperature compensation |
compensated -25 °C to 85 °C [-13 °F to 185°F] |
Hochleistungs-Druckaufnehmer – Hochleistung
Komplette verstärkte und kompensierte Druckmesstechnik. Dank einer großen Vielfalt an Anschlüssen, Steckern, Ausgängen und Druckbereichen können diese Druckaufnehmer genau auf die Bedürfnisse der jeweiligen Anwendung abgestimmt werden.
Hochleistungsdruckwandler werden so ausgelegt, dass sie auch in den anspruchsvollsten Umgebungen gegen aggressive Medien beständig sind.
Erhältliche Serien: MLH, PX2, PX3 und SPT.
| Serie | PX2 | PX3 | SPT | MLH (Re-design in preparation! Please ask us if you need actually information about this serie!) |
| Description | NPT 1/4-18, NPT 1/8-27, 9/16-18 UNF SAE J1926-3, 7/16- 20 UNF SAE J1926-3, 1/4 45° Flare Female Schrader, M12 X 1.5 ISO 6149-3, G1/4 ISO 1179-3, G1/8 ISO 1179-3 |
7/16-20 UNF; G1/4; M12 x 1,5; 1/4-18 NPT; 1/8-27 NPT | 1/8-27 NPT, 1/4-18 NPT, 7/16-20 UNF, 1/4-19 BSPP, 1/4 VCR gland |
1/4-18 NPT; M12 x 1.5 (ISO 6149); M14 x 1.5 (ISO 6149); 3/8-24 UNF (SAE-3 O-ring boss); M18 x 1.5 (ISO 6149); 1/8 in-27 NPT; 1/2 in-20 UNF (SAE-5 O-ring boss); M10 x 1 (ISO 6149); 1/4 in SAE female Schrader anmd many more … |
| Construction | port and housing: 304 stainless steel; connector: PBT 30% GF |
port brass C36000; Metri Pack 150: PBT 30%GF; external O-ring seal on G1, M1 port: nitrile | wetted parts 316L SS | port: 304L stainless steel; diaphragm: Haynes 214 alloy |
| Pressure Range | absolute, sealed gage | absolute, sealed gage | absolute, sealed gage5 psig to 250 psig | absolute, sealed gage, 50 psig to 8k psig |
| Output Signal | ratiometric: 5.0 V, 10 %Vs to 90 %Vs; 5.0 V, 5 %Vs to 95 %Vs; 3.3 V, 10 %Vs to 90 %Vs; 3.3 V, 5 %Vs to 95 %Vs regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc, 1 Vdc to 5 Vdc current: 4 mA to 20 mA |
ratiometric (from 5 Vdc excitation): 0.5 Vdc to 4.5 Vdc; | 4 mA to 20 mA, 0 mV to 100 mV, | ratiometric (from 5 Vdc excitation): 0.5 Vdc to 4.5 Vdc; regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc, 1 Vdc to 5 Vdc; current: 4 mA to 20 mA |
| Accuracy | ±0.25 % FSS | ±0.25 % FSS | ±0.25 %BFSL max. | ±0.25 %FSS (±0.5 %FSS on ranges below 100 psi) |
| Total Error Band | ±2 %FSS at -40 °C to 125 °C [-40 °F to 257 °F] | ±1 %FSS at -20 °C to 85°C [-4°F to 185°F] | ±2 %FSS to ±15 %FSS, depending on temp range and termination type | |
| Operating Temperature Range |
-40 °C to 125 °C [-40 °F to 257 °F] | -40 °C to 125 °C [-40 °F to 257 °F] | -40 °C to 85 °C [-4 °F to 185 °F] | -40 °C to 125 °C [-40 °F to 257 °F] |
| Compensated Temperature range | -40 °C to 125 °C [-40 °F to 257 °F] | -40 °C to 125 °C [-40 °F to 257 °F] | -10°C to 85°C [14°F to 185°F] | ratiometric output: -40 °C to 125 °C [-40 °F to 257 °F] |
| Amplified | yes | yes | yes | yes amplified and unamplified |
| Termination/ Connector |
Packard Metripak 150, Micro M12 IEC 61076-2, DIN EN 175301-803C, Deutsch DTM04-3P, cable harness (1, 2, 3, 5 meter) |
Packard Metripak 150 | bayonet connector, cable | Delphi Metripak 150; Hirschmann (mates with G4W1F); M12 x 1 (Brad Harrison micro); DIN 43650-C, 8 mm-male; Amp Superseal 1.5; cable (1 m); cable (3 m); flying leads (20 AWG – 6 in); Deutsch DTM04-3P (integral) |
| Measurements | 66 mm x 21,5 mm dia. [2.60 in x 0.84 in dia.] | ca. 50mm x 23 mm dia. | 22,2mm x 22,2mm x length varies | 27mm x 27mm x 55mm |
| Certifications / Approvals | RoHS; CE | RoHS, CE and REACH | n.a. | RoHS; CE; UL component recognition for USA/Canada: file no. E258956 |
| Features | designed for configurability; cost-effective; application expertise; global support; industry-leading Total Error Band; durable; designed to Six Sigma standards; broad compensated temperature range; good EMC protection |
Low current bconsumption; Media compatibility, wide pressure range ( 1bar to 46 bar); Ingress protection up to IP67 | calibrated and temperature compensated; NEMA 4 design; rugged 316 stainless steel wetted parts |
all-metal wetted parts; no internal elastomeric seals; stable and creepfree; input reverse voltage protection; less than 2 ms response time; easy customization; exceeds CE heavy industrial EMC for use in areas of high RFI/EMI |
Wir freuen uns auf die Zusammenarbeit mit Ihnen!
→ zurück zur Produktübersicht