TruStability – Series:

Honeywell`s TruStability Board Mount Pressure Sensors consist of the following Series:

HSC-Serie
Compensated, amplified, ultra-low and low pressure

SSC –Serie
Compensated, amplified, ultra-low and low pressure

NSC – Serie
Uncompensated, unamplified, ultra-low and low pressure

TSC – Serie
Compensated, unamplified, low pressure

Piezoresistive silicon pressure sensors offering ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. Measure pressure ranges from

+-1.6 mbar to 10mbar, +- 160Pa to +-1MPa,
and +-0.5 inH2O to 150psi.

Multiple packaging, mounting, signal and customized calibration capabilities. With the single side wet media option, you can use one port of the sensor with condensing humidity or directly with non-corrosive liquid media.

Series TruStability RSC Serie   NEW !!! TruStability HSC Serie Trustability SSC-Serie TrueStability TSC-Serie TruStability NSC-Serie
Description amplified amplified amplified unamplified unamplified
Pressure Range +/- 1,6mbar to 10bar
[+/- 0,5in H2O to +/- 150psi]		 +/- 60mbar to +/- 10bar
[+/- 1psi to +/- 150psi];
+/- 1,6mbar to +/- 40mbar
[+/- 0,5in H2O to +/- 30inH2O]		 +/- 60mbar to +/- 10bar
[+/- 1psi to +/- 150psi];
+/- 1,6mbar to +/- 40mbar
[+/- 0,5in H2O to +/- 30inH2O]		 +/- 60mbar to +/- 10bar
[+/- 1psi to +/- 150psi];
E4		 +/- 60mbar to +/- 10bar
[+/-1psi to +/- 150psi];
+/- 2,5mbar to +/- 40mbar
[+/-1,0 in H2O to +/- 30inH2O]
Device Type gage, differential, absolute gage, differential, absolute gage, differential, absolute gage, differential gage, differential, absolute
Output Signal 24 bit digital SPI-compatible analog (Vdc); digital (I2C or SPI) analog (Vdc); digital (I2C or SPI) analog (mV) analog (mV)
Calibrated yes yes yes yes no
Temperature comp. yes yes yes yes no
Total error band +/-0,75%FSS;  +/- 1%FSS; +/- 2% FSS; +/- 3% FSS +/- 1% FSS +/- 2% FSS    
Accuracy +/- 0,1 % FSS BFSL +/- 0,25% FSS BFSL +/- 0,25% FSS BFSL +/- 0,25% FSS BFSL +/- 0,25% FSS BFSL
Mounting options DIP, SMT DIP, SIP, SMT DIP, SIP, SMT DIP, SIP, SMT DIP, SIP, SMT
Operating temperature range -40°C to +85°C
[-40°F to 185°F]		 -20°C to +85°C
[-4°F to 185°F]		 -40°C to +85°C
[-40°F to 185°F]		 -40°C to +85°C
[-40°F to 185°F]		 -40°C to +85°C
[-40°F to 185°F]
Compensated temperature range compensated
0 °C to 50 °C
[32 °F to 122 °F]		 compensated
0 °C to 50 °C
[32 °F to 122 °F]		 compensated
 -20 °C to +85°C
 [-4 °F to 185 °F]		 compensated
0 °C to 85 °C
[32 °F to 185 °F]		 uncompensated
Maesurements ( H x W x D ) (10 x 12,5 )mm; [0,39 x 0,49]in varies by package style varies by package style varies by package style varies by package style
Approvals RoHS, REACH RoHS, WEEE RoHS, WEEE RoHS, WEEE RoHS, WEEE
Features The RSC Series is a piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-linearity using a 24-bit analog-todigital converter with integrated EEPROM. Pressure data may be acquired at rates between 20 and 2000 samples per second over an SPI interface. It is intended for use with non-corrosive, non-ionic gases, such as air and other dry gases, designed and manufactured according to ISO 9001 standards, and is REACH and RoHS compliant.Power consumption less than 10mW, typ;  industry-leading long-term stability; liquid media option extends performance to non-corrosive, non-ionic liquids industry-leading long-term stability; liquid media option extends performance to non-corrosive, non-ionic liquids compensation makes it easier to integrate the sensor into systemas it eliminates the need to calibrate the system over temperatur; reduced part-to-part variation provides the flexility for customers to perform their own calibration while still benefitting from industry-leading stability, accuracy, and readability

Basic – Series:

ABP – Series
amplified, compensated, calibrated, very exact ( 1%Fehler)

TBP – Series
unamplified, compensated, calibrated

NBP – Series
unamplified

Serie BASIC ABP Serie BASIC TBP Serie BASIC NBP
Description amplified unamplified unamplified
Pressure Range +/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi] +/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi] +/- 60mbar to +/- 10bar [+/- 1psi to +/- 150psi]
Device Type gage, differential gage gage, absolute
Output Signal analog (Vdc); digital (I2C or SPI) analog (Vdc) analog (Vdc)
Calibrated yes yes no
Temperature comp. yes yes no
Total error band +/- 1,5% FSS n.a. n.a.
Accuracy +/- 0,25% FSS BFSL +/- 0,25% FSS BFSL +/- 0,25% FSS BFSL
Mounting options DIP, leadless  SMT, SMT DIP, leadless  SMT, SMT DIP, leadless  SMT, SMT
Operating temperature range -40°C to +85°C
[-40°F to 185°F]		 -40°C to +125°C
[-40°F to 257°F]		 -40°C to +125°C
[-40°F to 257°F]
Compensated temperature range 0 °C to +50°C
[32°F to 122°F]		 compensated 
0 °C to 85 °C
[32 °F to 185 °F]
Maesurements ( H x W x D ) as small as 8mm x 11mm x 8mm  as small as 7mm x 7mm x 3,84mm
[ 0,276in x 0,276in x 0151in ]		 as small as 7mm x 7mm x 3,84mm
[ 0,276in x 0,276in x 0151in ]
Approvals RoHS, REACH RoHS, WEEE RoHS, WEEE
Features The ABP Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. Special Option: Sleep Mode for battery powered devices ! silicon gel coating in media part option for use in applications where condensation can occur cost-effective; Honeywell brand; for use in applications where condensation can occur; small size, durable, flexible, robust

ABP 2  – Series

with either analog or digital output signal, compensated and calibrated, total error 1.5% error, various ports, some also suitable for liquids, also used in food technology (NSF).

24PC, 26PC and 40PC – Series

In addition to its TruStability pressure sensors, Honeywell offers many other board mount pressure sensing devices including 24PC, 26PC, ASDX, NBP and TBP Series.

Proven sensing technology that uses a specialized piezoresistive micromachined sensing element.

Pressure ranges from 5 in H2O to 250 psi.

Series  26PC  24PC 40PC
Description calibrated bare sensor amplified
Construction  silicon die
 elastomeric
 technology		  silicon die
 elastomeric
 technology		 monolithic silicon die
Pressure Range  1 psi to 100 psi  1 psi to 100 psi +/- 1 psi to 500 psi
Device Type differential, gage absolute, differential, gage gage
Output Signal mV mV 0.5 Vdc to 4.5 Vdc
Accuracy  linearity, hysteresis & repeatability
 0.5 % typ.		  linearity, hysteresis & repeatability
 0.5 % typ.		 linearity &
hysteresis
0.25 % typ.
Temperature Range compensated
 0 °C to 50 °C
 [32 °F to  122°F]		 no temperature compensation compensated
-45 °C to 125 °C
[-49 °F to  257°F]
Series SX SCX
Description bare sensor calibrated
Construction silicon die on
ceramic voltage excitation		 silicon die with thick-film
resistors
Pressure Range 1 psi to 300 psi 1 psi to 150 psi
Device Type absolute, gage absolute,differential,
gage
Output Signal mV mV
Accuracy linearity, hysteresis
& repeatability
0.2 % typ.		 linearity &
hysteresis
0.3 % typ.
Temperature Range no temperature
compensation		 compensated
0 °C to 70 °C
[32 °F to 158 °F]

Potential Applications

Air compressors, airflow monitors, automotive, diagnostics, barometers, battery-powered equipment, blood analysis machines, chemical analyzers, dental equipment, dialysis equipment, environmental controls, flow calibrators, gas chromatography, gas flow instrumentation, HVAC, industrial instrumentation and machinery, medical monitors, oxygen concentrators, pneumatic controls, sleep apnea monitoring, therapy equipment, and ventilation.

Heavy-Duty – Pressure Sensors

Developed for potential use in pressure applications involving  measurement of hostile media in harsh environments compatible  with 316 stainless steel. This type of steel increases corrosion resistance, improves resistance to pitting from chloride ion solutions, and provides increased strength at high temperatures.

The small sensor size allows them to be used on their own in tight packages or as the building block for a complete transducer. The vacuum gage series sensors are specifically designed for potential use in applications that can be exposed to vacuum.

Series include 13 mm and 19 mm.

Series 19U 19C
Description non-calibrated
bare sensor
media isolated		 calibrated
media isolated
Construction wetted parts
316 L SS		 wetted parts
316 L SS
Pressure Range 3 psi to 500 psi 3 psi to 500 psi
Device Type absolute, gage
vacuum gage		 absolute, gage
vacuum gage
Output Signal 100 mV 100 mV
Accuracy linearity &
hysteresis
+/- 0.2 % max		 linearity &
hysteresis
+/- 0.2 % max
Temperature Range no temperature
compensation		 compensated
-25 °C to 85 °C
[-13 °F to  185°F]

Pressure Transducers – Heavy-Duty

Complete amplified and compensated pressure measurement solutions. With a choice of ports, connectors, outputs, and pressure ranges, these transducers can be configured to meet the needs of the application. Heavy-duty pressure transducers are engineered to be resistant to aggressive media in most harsh environments.

Series include MLH, PX2, PX3 and SPT.

Series PX2 PX3 SPT MLH   (Re-design in preparation! Please ask us if you need actually information about this serie!)
Description NPT 1/4-18, NPT 1/8-27, 9/16-18 UNF SAE J1926-3, 7/16-
20 UNF SAE J1926-3, 1/4 45° Flare Female Schrader, M12 X
1.5 ISO 6149-3, G1/4 ISO 1179-3, G1/8 ISO 1179-3		 7/16-20 UNF; G1/4; M12 x 1,5; 1/4-18 NPT; 1/8-27 NPT 1/8-27 NPT, 1/4-18 NPT, 7/16-20 UNF,
1/4-19 BSPP, 1/4 VCR gland		 1/4-18 NPT; M12 x 1.5 (ISO 6149); M14 x 1.5 (ISO 6149); 3/8-24 UNF
(SAE-3 O-ring boss); M18 x 1.5 (ISO 6149); 1/8 in-27 NPT; 1/2 in-20 UNF
(SAE-5 O-ring boss); M10 x 1 (ISO 6149); 1/4 in SAE female Schrader anmd many more …
Construction port and housing: 304 stainless steel;
connector: PBT 30% GF		 port brass C36000; Metri Pack 150: PBT 30%GF; external O-ring seal on G1, M1 port: nitrile wetted parts 316L SS port: 304L stainless steel; diaphragm: Haynes 214 alloy
Pressure Range absolute, sealed gage absolute, sealed gage absolute, sealed gage5 psig to 250 psig absolute, sealed gage, 50 psig to 8k psig
Output Signal ratiometric: 5.0 V, 10 %Vs to 90 %Vs; 5.0 V, 5 %Vs to 95
%Vs; 3.3 V, 10 %Vs to 90 %Vs; 3.3 V, 5 %Vs to 95 %Vs
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to
4.5 Vdc, 1 Vdc to 5 Vdc
current: 4 mA to 20 mA		 ratiometric (from 5 Vdc excitation): 0.5 Vdc to 4.5 Vdc; 4 mA to 20 mA, 0 mV to 100 mV, ratiometric (from 5 Vdc excitation): 0.5 Vdc to 4.5 Vdc;
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc,
1 Vdc to 5 Vdc;
current: 4 mA to 20 mA
Accuracy ±0.25 % FSS ±0.25 % FSS ±0.25 %BFSL max. ±0.25 %FSS (±0.5 %FSS on ranges below 100 psi)
Total Error Band ±2 %FSS at -40 °C to 125 °C [-40 °F to 257 °F] ±1 %FSS at -20 °C to 85°C [-4°F to 185°F] ±2 %FSS to ±15 %FSS, depending on temp range and termination type
Operating
Temperature Range		 -40 °C to 125 °C [-40 °F to 257 °F] -40 °C to 125 °C [-40 °F to 257 °F] -40 °C to 85 °C [-4 °F to 185 °F] -40 °C to 125 °C [-40 °F to 257 °F]
Compensated Temperature range -40 °C to 125 °C [-40 °F to 257 °F] -40 °C to 125 °C [-40 °F to 257 °F] -10°C to 85°C [14°F to 185°F] ratiometric output: -40 °C to 125 °C [-40 °F to 257 °F]
Amplified yes yes yes yes amplified and unamplified
Termination/
Connector		 Packard Metripak 150, Micro M12 IEC 61076-2,
DIN EN 175301-803C, Deutsch DTM04-3P,
cable harness (1, 2, 3, 5 meter)		 Packard Metripak 150 bayonet connector, cable Delphi Metripak 150; Hirschmann (mates with G4W1F); M12 x 1 (Brad
Harrison micro); DIN 43650-C, 8 mm-male; Amp Superseal 1.5; cable
(1 m); cable (3 m); flying leads (20 AWG – 6 in); Deutsch DTM04-3P
(integral)
Measurements 66 mm x 21,5 mm dia. [2.60 in x 0.84 in dia.] ca. 50mm x 23 mm dia.  22,2mm x 22,2mm x length varies 27mm x 27mm x 55mm
Certifications / Approvals RoHS; CE RoHS, CE and REACH n.a. RoHS; CE; UL component recognition for USA/Canada: file no. E258956
Features designed for configurability; cost-effective; application
expertise; global support; industry-leading Total Error Band;
durable; designed to Six Sigma standards; broad compensated
temperature range; good EMC protection		 Low current bconsumption; Media compatibility, wide pressure range ( 1bar to 46 bar); Ingress protection up to IP67 calibrated and temperature compensated;
NEMA 4 design; rugged 316 stainless steel
wetted parts		 all-metal wetted parts; no internal elastomeric seals; stable and creepfree;
input reverse voltage protection; less than 2 ms response time; easy
customization; exceeds CE heavy industrial EMC for use in areas of high
RFI/EMI

We are looking forward to a good cooperation with you!

→ go back to product overview

Theme: Illdy. © Copyright 2023. Roßmann Electronic GmbH