Pressure Switches Line Guide
Better under pressure. For years, manufacturers and operators of heavy-duty equipment have trusted Honeywell pressure and vacuum switches. They’re proven under pressure, in applications constantly under attack from chemical splashes, performance spikes and other harsh environments. These switches sense a change in the pressure or vacuum, opening or closing an electrical circuit when the designated point is reached.
Honeywell offers an impressive line:
Feature set points ranging from 0.5 psi to 3000 psi. These rugged components have enhanced repeatability of set points and wide media capability. Potential applications include transmissions, hydraulics, brakes, power steering, fuel pressure, oxygen concentrators, dental air, generators/compressors, and pool/spa water pressure.
Series | Series 1000 | 5000 Pressure | 5000 Vacuum | III Vacuum | III Pressure |
Type | hydraulic brake pressure switch | direct action blade contact | direct-action blade contact | snap-action switch | snap-action switch |
Set point range | 20 psi ±10 psi [1,37 bar ±0,69 bar] | factory set: 0.5 psi to 150 psi | factory set: 1.1 in-Hg to 22 in-Hg | factory set: 1.1 in-Hg to 22 in-Hg | factory set: 1 psi to 70 psi |
Vacuum | – | – | 1.1 in-Hg to 22 in-Hg | 2 in-Hg to 22 in-Hg, 15 in-H2O to 36 in-H2O | – |
Contacts | silver-plated copper contacts | composite-gold plate | composite-gold plate | fine silver-gold plate | fine silver-gold plate |
Oper. pressure | 1200 psi | 150 psi for 0.5 psi to 24 psi; 250 psi for 25 psi to 150 psi | 30 in-Hg max. | 200 psi | 200 psi |
Proof pressure | 2400 psi | 500 psi | – | – | 350 psi |
Burst pressure | 4800 psi | 750 psi for 0.5 psi to 24 psi; 1250 psi for 25 psi to 150 psi |
150 psi | 500 psi | 500 psi |
Connector | M10 x 1.25 banjo fitting (single or double); M10 x 1; 1/8-27 NPT |
1/8-27 NPT male thread; piston 1/2-20 UNF | 1/8-27 NPT male thread standard (others, including metric, available) |
1/8-27 PTF SAE short male thread standard (others, including metric, available |
1/8-27 SAE short male thread standard (others, including metric, available) |
Terminals | 1/4 in blade | #8-32 screws, 1/4 in blade, MetriPak 280 | #8-32 screws, 1/4 in blade, MetriPak 280 |
8 in wire leads, 18 ga. | 8 in wire leads, 18 ga. |
Dimensions | Ø 18 mm hex x 54,10 mm [2.13 in] L | Ø 1.47 in x 2.3 in L (screw); Ø 1.47 in x 2.9 in L (MetriPak 280) |
Ø 1.47 in x 2.3 in L (screw); Ø 1.47 in x 2.9 in L (MetriPak 280) |
Ø 1.69 in x 2.5 in L | Ø 1.69 in x 2.5 in L |
Features | IP65; low set point; high burst rating; banjo bolt fitting |
stands up to extended-duty applications; factory set, capable of field adjustment; direct acting blade; no dead band; Kapton™ diaphragm |
stands up to extended-duty applications; factory set; fluorosilicone rubber diaphragm; various terminations |
non-ferrous chamber; enhanced set-point integrity; low contact resistance; wiping action; fast transfer time |
non-ferrous chamber; enhanced set-point integrity; snap-action switch; dead band; low contact resistance; wiping action |
Further information in the catalogue “Controls, Monitors, and Pressure Switches” from Honywell.
We are looking forward to a good cooperation with you!
→ go back to product overview