Fiber Optics/ SERCOS Transmitters and Receivers
Unfortunately all Sercos transmitters and receivers of the series
HFD7520-2xx; HFD7510-2XX; HFE7020-210; HFD7000-2XX
HFE7020-210; HFE7000-210 und HFE7010-210 had been cancelled by the manufacturer.
Do you need this types as spare parts or simular elements for new developments,
please contact us, we help you with alternative solutions.
SERCOS transmitters convert optical input into electrical signal and are designed for data transmission in industrial LAN applications. SERCOS receivers provide digital output to indicate presence or absence of light, and sealed products have reverse polarity and overvoltage protection.
 |
|
|
|
|
| Series | HFD7520-2XX | HFD7510-2XX | HFE7020-210 | HFD7000-2XX |
| Housing | SMA | SMA | plastic SMA fiber DIP | SMA |
| Sensitivity | -22 dBm @ 650 nm | -29,5 dBm @ 650 nm | -1.5 dBm typ. at 30 mA | -21 dBm @ 660 nm |
| Data Rate | 156 Mbps | 50 Mbps | 156 Mbps | 16 Mbps |
| Current Consumption | 40 mA | 40 mA | 50 mA | 45 mA |
| Supply Voltage | -0,5 V to 7,0 V | -0,5 V to 7,0 V | 6 V |
 |
|
|
|
| Series | HFE7020-210 | HFE7000-210 | HFE7010-210 |
| Housing | SMA | SMA | SMA |
| Data Rate | 156 Mbps | 50 Mbps | 50 Mbps |
| Output Power | -1,5 dBm @ 30 mA | -7 dBm @ 20 mA | -13 dBm @ 20 mA |
| Forward Current | 50 mA | 40 mA | 40 mA |
Fiberoptik/ Duplexers
Unfortunately all duplexers
HOD2236-111/BBA; HOD4090-111/BBA
by the manufacturer Honeywell has been cancelled.
Do you need this types as spare parts or simular elements for new developments,
please contact us, we help you with alternative solutions.
Duplexers contain two devices per module so they may communicate in opposing directions simultaneously and independently. May be used to multiplex two signals to a single fiber and where dual fiber solution is neither possible nor economical.
 |
||||
| Series | HOD2236-111/BBA | HOD4090-111/BBA | ||
| Device location | Port 1 | Port 2 | Port 1 | Port 2 |
| Device type | transmit 1300 nm multimode laser | receive 850 nm PIN diode | receive 1300 nm PIN diode | transmit 850 nm VCSEL |
| Rise/fall time | < 3 ns | < 3 ns | < 3 ns | < 3 ns |
| Fiber coupled power range | 40 mW to 100 mW | – | – | 200 mW to 400 mW |
| Slope efficiency | 0.35 mW/mA typ. | – | – | 0.2 mW/mA typ. |
| Forward voltage | 1.2 V typ. | – | – | 1.8 V typ. |
| Threshold current | 12 mA typ. | – | – | 3.6 mA typ. |
| Spectral bandwidth | 2 nm typ. | – | – | 0.85 nm max. |
| Response time | 0.5 ns max. | 3 ns max. | 1 ns max. | 300 ps max. |
| Flux responsivity | – | 0.3 A/W typ. | 0.50 A/W typ. | – |
| Dark current | – | 0.05 nA typ. | 2.0 nA typ. | – |
| Reverse voltage | 0.5 ns max. | 3 ns max. | 1 ns max. | 300 ps max. |
| Capacitance | – | 1.5 pF typ. | 1.5 pF typ. | – |
| Optical budget when used with corresponding duplexer | < 10 dB | < 10 dB | < 10 dB | < 10 dB |
| Connector | ST low profile | ST low profile | ST low profile | ST low profile |
| Operating temperature range | 0 °C to 70 °C [32 °F to 158 °F] |
0 °C to 70 °C [32 °F to 158 °F] |
0 °C to 70 °C [32 °F to 158 °F] |
0 °C to 70 °C [32 °F to 158 °F] |
| Mounting | pcb | pcb | pcb | pcb |
| Measurements | 16,06 mm H x 9,65 mm W x 28,7 mm L [0.63 in H x 0.38 in W x 1.02 in L] |
16,06 mm H x 9,65 mm W x 28,7 mm L [0.63 in H x 0.38 in W x 1.02 in L] |
||
| Features | full duplex over single fiber; dc to 160 mHz link bandwidth; link budgets of 2 km [1.25 miles] or greater; 40 dB isolation; other transmitter/receiver configurations, housings, and connector options available |
|||
We are looking forward to a good cooperation with you!
→ go back to product overview